7526
Front door assembly removal
See the part number for the Front door assembly for the specific model you need on.
Remove the front access cover assembly. See
1.
Remove the LVPS. See
2.
3.
Disconnect the JTPS1 cable (A) from the system board.
Release the left and right front door assembly cable.
4.
Release the cable springs (B) from the front door assembly.
5.
Service Manual
4-92
"Front access cover assembly removal" on page
"Low-voltage power supply (LVPS) removal" on page
4-21.
4-115.
Previous
Next
Go Back