Enabling / Disabling Partitions; Exiting The Installer Mode - Visonic PowerMaster-10 Installer's Manual

3.14.2 Enabling / Disabling Partitions

To
enable or disable the
Step 1
Select "12:PARTITIONING" menu
12:PARTITIONING
– Enabling / disabling Partitions
[1]
Enter the Installer Menu and select the "12:PARTITIONING" menu (see section 3.2).
[2] Select between "Disable" (default) and "Enable".

3.15 Exiting the Installer Mode

To exit the Installer Mode, proceed as follows:
Step 1
[1]
Any screen
– Exiting the Installer Mode
[1]
To exit "INSTALLER MODE", move up the menu by pressing the
display reads [<OK> TO EXIT] or preferably; press the
to the exit screen [<OK> TO EXIT].
[2]
When the display reads [<OK> TO EXIT], press
[3] The system exits the "INSTALLER MODE" menu and returns to the normal disarm state while showing the
READY display.
78
partition feature proceed as follows:
Step 2
[1] Select whether to enable of disable
Partitioning
Disable
Step 2
<OK> TO EXIT
or
Step 3
[2] [3]
READY 12:00
button once which brings you immediately
.
D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
Step 3
[2]
To Step 1
button repeatedly until the