Enabling / Disabling Auto-Arming; Setting The Auto-Arming Time - Visonic POWERMASTER-10 User Manual

C.8 Enabling / Disabling Auto-Arming
The PowerMaster-10 system can be programmed to automatically arm itself on a daily basis at a predetermined
time. This feature is useful especially in commercial applications, such as in stores, to ensure that the system is
always armed and without having to assign security codes to employees.
♦ Here you can enable (activate) and disable (stop) the Auto-Arming. To set the Auto-Arming time –
see section C.9.
Carefully read the section titled "Additional Information" according to the indicated references
at end of this section.
1.
AUTO-ARM ENABLE
2.
disable autoarm
or
enable autoarm
3.
☺
Return to step 1
C.9 Setting the Auto-Arming Time
♦ Here you can program the exact time of the Auto-Arming.
1.
AUTO-ARM TIME
2.
arm time 12:00P
3.
TIME 08:30A
☺
Return to step 1
1
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
2
The display shows the current setting (indicated by a
can now select either to enable or disable auto-arming using the
3
The symbol now appears next to the new selected option.
4
The display shows the current setting of the Auto-Arm Time, for example, "
blinking on the first hour digit "1". For detailed explanation of how to set the time - refer to Section C.6 B.
5
The saved auto arm time is displayed without the cursor, for example, "
6
You can now select another option in the User Setting menu (see section B.1 and section B.2), or quit
programming (see section B.3).
D-302757
Enter the USER SETTINGS menu, select the [AUTO-ARM ENABLE] option
and press the
The display shows the currently selected setting.
Click the
setting, for example, "enable autoarm" and press
A "Happy Tune"
returns to the User Setting menu, step 1.
Enter the USER SETTINGS menu, select the [AUTO-ARM TIME] option and
press the
The display shows the current setting of the Auto-Arm Time. Use the
numerical keypad to enter the correct time, for example, "8:30A" at the
position of the blinking cursor.
When you are satisfied with the setting, press
A "Happy Tune"
returns to the User Setting menu, step 1.
Additional Information (section C. 8 - section C. 9)
MENUS AND FUNCTIONS
1
button to confirm.
or button until the display reads the desired
☺
sounds. The display confirms the saved setting, then
1
button to confirm.
4
☺
sounds. The display confirms the saved time, then
symbol), for example, "
1
etc – see table
2
to confirm.
5 3
to confirm.
5 6
Disable autoarm
or button.
", with the cursor
12:00 PM
".
08:30 A
". You
25