Programming; General Guidance; Navigation; Feedback Sounds - Visonic PowerMaster-10 Installer's Manual

3. PROGRAMMING

3.1 General Guidance

This chapter explains the Installer programming (configuration) options of your PowerMaster-10 / PowerMaster-30
system and how to customize its operation to your particular needs and end user requirements.
The PowerMaster-30 includes a partition
controllable areas with different user codes assigned to each partition. A partition can be armed or disarmed
regardless of the status of the other partitions within the system.
Tech Tip :
For your convenience, we recommend programming the PowerMaster-10 / PowerMaster-30 on the work bench
before actual installation. Operating power may be obtained from the backup battery or from the AC power supply.

3.1.1 Navigation

The keypad's buttons are used for navigation and configuration when programming. The following table provides
a detailed description of the function or use of each button.
Button Definition
NEXT
BACK
OK
HOME
AWAY
OFF
0 - 9
To review the options within the control panel menus and select an option, repeatedly press the Next
Back button until the desired option is displayed (designated as
button to select the desired option (also designated as
options repeatedly press the Home
button.
To simplify the procedure further, you really need two basic buttons to program the entire panel: The Next
and the OK
selects the option you want.
If you can remember that, you know how to program the panel. It's as easy as that.

3.1.2 Feedback Sounds

The sounds you will hear while using and configuring the control panel are:
Sound Definition
Single beep, heard whenever a key is pressed
Double beep, indicates automatic return to the normal operating mode (by timeout).
Three beeps, indicates a trouble event
Happy Tune (- - - –––), indicates successful completion of an operation.
♫☺
Sad Tune (–––––), indicates a wrong move or rejection
♫
Refers to PowerMaster-30 only
∗
D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
∗ feature. Partitioning allows you to have up to three independently
Navigation / Setting Function
Use to move / scroll forward to the next menu options.
Use to move / scroll backward to the previous menu options.
Use to select a menu option or to confirm a setting or action.
Use to move one level up in the menu or to return to previous setting step.
Use to jump back to the [<OK> TO EXIT] screen to quit programming.
Use to cancel, delete, clear or erase setting, data, etc.
Numerical keypad used to enter numerical data when needed.
button and to exit the programming menu press the Away
button. The
in this guide). To return to the previous
button scrolls through the options, and the
in this guide), then press the OK
or
button
31