Enabling / Disabling Auto-Arming; Setting The Auto-Arming Time - Visonic PowerMaster-10 G2 User Manual

MENUS AND FUNCTIONS
on the first digit.
4
You can move the cursor to the next or previous digit using the
5
For the year, enter the two last digits only.
6
You can now select another option in the User Settings menu (see section B.1 and section B.2), or quit
programming (see section B.3).
7
This setting can be performed only after completing steps 1 – 3 of section B.8A.
B.9 Enabling / Disabling Auto-Arming
The PowerMaster system can be programmed to automatically arm itself on a daily basis at a predetermined
time. This feature is useful especially in commercial applications, such as in stores, to ensure that the system is
always armed and without having to assign security codes to employees.
 Here you can enable (activate) and disable (stop) the Auto-Arming. To set the Auto-Arming time –
see section B.10.
 Auto-arming can arm a "NOT READY" system only if forced arming is enabled by the installer while
programming your system.
 Carefully read the section titled "Additional Information" according to the indicated references
table at end of this section.
1.
AUTO-ARM ENABLE
enable autoarm
2.
or
disable autoarm
3.
☺

Return to step 1
B.10 Setting the Auto-Arming Time
 Here you can program the exact time of the Auto-Arming.
Note:
This feature is not to be not to be enabled in UL Listed product.
1.
AUTO-ARM TIME
2.
arm time 12:00P
3.
TIME 08:30A
☺

Return to step 1
1
For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.
2
The display shows the current setting (indicated by a
now select either to enable or disable auto-arming using the

3
The symbol now appears next to the newly selected option.
30
Enter the [USER SETTINGS] menu, select the [AUTO-ARM ENABLE] option
and press
The display shows the currently selected setting.

Click the
setting, for example, [disable autoarm] and press
A "Happy Tune" 
then returns to the User Settings menu, step 1.
Enter the [USER SETTINGS] menu, select the [AUTO-ARM TIME] option
and press
The display shows the current setting of the Auto-Arm Time. At the blinking
cursor position, enter the correct time, for example, "8:30A", using the
numerical keypad.
When you are satisfied with the setting, press
A "Happy Tune" 
returns to the User Settings menu, step 1.
Additional Information (section B.9 - section B.10)
1
.
or button until the display reads the desired
☺
sounds. The display confirms the saved setting, and
1
.
4
☺
sounds. The display confirms the saved time, then

symbol), for example, [
or
D-303223 PowerMaster-10/30 G2 User's Guide
or button.
1
2
to confirm.
3
to confirm.
5, 6
enable autoarm
]. You can
button.
etc – see