Visonic PowerMaster-10 Installer's Manual page 54

Fully supervised wireless alarm control system
Hide thumbs Also See for PowerMaster-10:
Table of Contents

Advertisement

The
04.COMMUNICATION
features and parameters related to the communication and reporting as follows (see detailed list in Step-3 of the
chart below):
Option
1:PSTN TEL LINE
2:GSM/GPRS/SMS
3:C.S.REPORTING
4:PRIVATE REPORT
5:MOTION CAMERA
6:UP/DOWNLOAD
To enter the
04.COMMUNICATION
Step 1
Select
[1]
"COMMUNICATION"
INSTALLER MODE
04.COMMUNICATION
D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
menu contains several sub-menu options, each covering a group of configurable
Description of Option Features and Parameters
Contains configurable features and parameters related to the PSTN
telephone line to which the PowerMaster-10 / PowerMaster-30 is connected.
Contains configurable features and parameters related to the Cellular
connection of the PowerMaster-10 / PowerMaster-30 system.
Contains configurable features and parameters related to Reporting of event
messages to Central Monitoring Stations via telephone, cellular or IP
broadband communication.
Contains configurable features and parameters related to Reporting event
messages to Private Users via telephone or SMS.
Contains configurable features and parameters related to Motion Cameras
for Video Alarm Verification and forwarding of image clips to Central
Monitoring Station and other remote subscribers via e-mail and/or MMS
network.
Contains configurable connection information, access permission and security
codes related to the Upload/Download procedures via PSTN or GPRS.
menu and to select and configure an option, proceed as follows:
Step 2
Select
Communication
Sub-menu option
1:PSTN TEL LINE
2:GSM/GPRS/SMS
3:C.S. REPORTING
( ) These options are
available only to the
"Master Installer"
Step 3
[2]
Select the "Communication" Parameter you
wish to configure
AREA CODE SKIP
LINE PREFIX
DIAL METHOD
GPRS REPORT
GSM REPORT
SMS REPORT
GPRS APN
GPRS USERNAME
01:REPORT EVENTS
02:1st RPRT CHAN
03:2nd RPRT CHAN
04:3rd RPRT CHAN
05:DUAL REPORT
11:RCVR1 ACCOUNT
12:RCVR2 ACCOUNT
16:PSTN/GSM RCV1
Section
3.6.2
3.6.3
3.6.4
3.6.5
3.6.6
3.6.7
[3]
SIM PIN CODE
GPRS PASSWORD
NETWORK ROAMING
GPRS ALWAYS ON
GSM KEEP ALIVE
46:PSTN RETRIES
47:GSM RETRIES
51:TEL AUTO TEST
52:AUTO-TST TIME
53:COM.FAIL RPRT
PSTN FAIL
GSM/GPRS FAIL
Step
4
[4]
See
section
3.6.2
3.6.3
3.6.4
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powermaster-30

Table of Contents