Visonic PowerMaster-10 Installer's Manual page 89

80 % (∼ 13 Hrs)
Time to Charge
4.8V 2200 mAh, rechargeable NiMH battery
Optional Backup
pack, p/n GP230AAHC4YMX, manufactured
Battery Pack
by GP
80 % (∼ 24 Hrs)
Time to Charge
(optional backup
battery pack)
NA
Wired Detectors
Total (Sum)
Current
NA
Site External
Siren Current
(EXT)
NA
Site Internal Siren
Current (INT)
Current sink to control panel GND 100 mA
PGM
max.
Max. external DC voltage +30 VDC
NA
High Current /
Short Circuit
Protection
88
12h 45mA
24h 0mA
36h (no
48h (no
1 Devices that are connected between
12V terminal and GND of
PowerMaster-30, that includes internal
GSM and proximity reader.
2 7.2V 1300 mAh, rechargeable NiMH
battery pack, p/n GP130AAH6BMX,
manufactured by GP.
3 9.6V 1800 mAh, rechargeable NiMH
battery pack, p/n GP180AAH8BMX,
manufactured by GP.
4 9.6V 2200 mAh, rechargeable NiMH
battery pack (special order).
Caution! Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to the
manufacturer's instructions.
Note: For compliance with UL standards
the battery backup period shall exceed 24
hours and 12 hours for compliance with CE
standards.
80 % (∼ 30 Hrs) for all battery types
See "Backup Battery Options" table above
NA
36* mA max.
450* mA max @ 12.5 VDC when powered
by AC/DC (10.5 VDC when in standby
mode)
450* mA max @ 12.5 VDC when powered
by AC/DC (10.5 VDC when in standby
mode)
*
Total PowerMaster-30 output current (of
INT & EXT sirens, PGM output and
detectors) cannot exceed 550 mA.
Current sink to control panel GND 100 mA
max.
Max. external DC voltage +15 VDC
All outputs are protected (automatic reset
fuse)
D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
90 mA
25 mA
5mA
backup)
(no backup) 0mA
backup)
120 mA
45mA
15mA