Powermaster-30 Installation; Opening The Powermaster-30 Control Panel And Bracket Mounting - Visonic PowerMaster-10 Installer's Manual

2.3 PowerMaster-30 Installation

Required tool: Philips screwdriver #2.
PowerMaster-30 mounting process is shown in figure 3.13 - 3.23.

2.3.1 Opening the PowerMaster-30 Control Panel and Bracket Mounting

To Mount the Unit:
1. Release the screws
2. Remove the front cover
3. Mark 4 drilling points on the mounting surface
4. Drill 4 holes and insert wall anchors
5. Fasten the back unit with 4 screws
D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
Figure 3.13 – Back Unit Mounting
A. Mounting surface
B. Back unit
21