Table of Contents
Advertisement
C.8 Enabling / Disabling Auto-Arming
The PowerMax10-G2 system can be programmed to automatically arm itself on a daily basis at a predetermined
time. This feature is useful especially in commercial applications, such as in stores, to ensure that the system is
always armed and without having to assign security codes to employees.
♦ Here you can enable (activate) and disable (stop) the Auto-Arming. To set the Auto-Arming time –
see section C.8.
Carefully read the section titled "Additional Information" according to the indicated references
at end of this section.
Enter the USER SETTINGS menu and select the [AUTO-ARM ENABLE].
When the display reads [AUTO-ARM OPTION] press
`
The display shows the currently selected setting.
a) Click the
desired setting, for example, "enable autoarm".
b) When the desired setting format appears on the display, press
to confirm.
I
OK
A "Happy Tune"
then returns to the User Setting menu, step
C.9 Setting the Auto-Arming Time
♦ Here you can program the exact time of the Auto-Arming.
Enter the USER SETTINGS menu and select the [AUTO-ARM TIME] option.
When the display reads [AUTO-ARM TIME] press
The display shows the current setting of the Auto-Arm Time
To set or change the Time, use the same instructions as described in
section C.8 step
When you are satisfied with the setting, press
A "Happy Tune"
then returns to the User Setting menu, step
D-302757
or
button until the display reads the
☺
sounds. The display confirms the saved setting,
4
.
☺
sounds. The display confirms the saved time,
MENUS AND FUNCTIONS
1
I
OK
.
2
.
5 3
I
OK
.
I
OK
to confirm.
.
5
1
etc – see table
AUTO-ARM ENABLE
Disable autoarm
or
enable autoarm
☺ Return to
1
AUTO-ARM TIME
arm time 12:00P
See section C.10 step
I
☺ Return to
I
OK
I
OK
I
OK
OK
`
27
Advertisement
Table of Contents
