Visonic PowerMaster-10 Installer's Manual page 9

Wired zones and
PGM
Reporting to Private
and Monitoring
Station by voice,
SMS and digital
communication
Quick installation
features
Device Locator
∗ Refers to PowerMaster-30 with voice option only
8
The control panel includes two hardwired
connections: one for wired zones and the
other for the PGM programmable wired
switch.
The PowerMaster-10 / PowerMaster-30
system can be programmed to send
various event notification messages such
as alarm, arming or trouble events to 4
private telephone subscribers by audible
signal and also to 4 SMS telephone
numbers and to enable two-way voice
communication ∗ with the Monitoring
Station.
Choosing the ideal location to mount a
wireless device can be cumbersome
procedure of running back and forth to the
panel to read the link quality. With
PowerG devices, there is no need to
consult the panel since all PowerG
devices include a built-in link quality
indicator. Therefore, choosing the ideal
location is done quickly and easily.
Helps you to easily identify the actual
device displayed on the LCD display.
To add a wired zone or PGM: see
section 2.2.8 Adding a Wired Zone or
PGM.
To program the PGM output: see
section 3.7 PGM Output.
To configure GSM reporting to Private
phones: refer to the PowerMaster User's
Guide, Chapter 6, section C.11
Programming Private Phone and SMS
Reporting
To configure GSM reporting to the
Montioring Station: see section 3.6.4
Configuring Events Reporting to
Monitoring Stations
To configure GPRS reporting to the
Monitoring Station: see section 3.6.4
Configuring Events Reporting to
Monitoring Stations
To choose the ideal location to mount a
wireless device, see section 2.1 Choosing
the Mounting Location
To read more on the Device Locator:
refer to the PowerMaster User's Guide,
Chapter 2 Operating the PowerMaster
System
To use the device locator when
bypassing a zone or when clearing a
bypassed zone: refer to the PowerMaster
User's Guide, Chapter 6, section C.1
Setting the Zone Bypass Scheme
To use the device locator when
conducting the periodic test: see
Chapter 4 Periodic Test or refer to the
PowerMaster User's Guide, Chapter 9
Testing the System
D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide