Disa Security Codes - Panasonic KX-TA308 Installation Manual

[512]-[513]

[512] DISA Security Codes

Assigns a maximum of 4 required DISA security codes if "Trunk Security" or "All Security"
is selected in program [511] "DISA Security Type".
5
Default
!
!
• The used security code numbers (not security codes) are printed on the SMDR.
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)
[513] Cyclic Tone Detection*
Assigns the number of times a cyclic tone is detected while the DISA outgoing message is
sent so that the system can recognize the end of the DISA call.
5
* Disable (Does not detect)
Default
• Feature References
Section 3, Features
Direct Inward System Access (DISA), Uniform Call Distribution (UCD)
4-62
System Programming
1
2
NEXT
All DISA security codes – Not stored
1
3
NEXT
4 Times
4.2
or
PREV
NEXT
code no. security code
(1···4) 4 digits
(0···9)
SELECT
1
SELECT
STORE
(Disable*/
2/3/4 Times)
* 1 : Required only when the optional OGM/FAX Detection
Card is installed.
System Programming
To continue
STORE END
To continue
END