Disa Security Codes - Panasonic KX-TA624 Installation Manual

512
Description
Selection
Default
Programming
Conditions
Feature Reference
4-94 System Programming
4.2

DISA Security Codes

Assigns the DISA (Direct Inward System Access) Security Codes.
• Code number : 1 – 4
• DISA security code: 4 digits (programmable)
All codes — Not stored
1. Enter 512.
Display: Security Code
2. Press NEXT.
Display: CODE-01:Not Stored
3. Enter a code number.
Display example: CODE-01: 1234
4. Enter a DISA security code.
To change the current entry, press CLEAR and enter the new code.
5. Press STORE.
6. To program another code, press NEXT or PREV, or
SELECT and enter the desired code number.
7. Repeat steps 4 through 6.
8. Press END.
• This setting is required if All Security mode or Trunk (outside (CO)
line) Security mode is selected in program [511] "DISA Security Type".
• There are four programmable security codes. Each code should be
different and composed of numerical digits, 0 – 9.
• The number of digits for the security codes can be programmed in [530]
"DISA Security Codes Digits Selection".
• The used security code numbers (not security codes) are printed on the
SMDR.
Section 3, Features
Direct Inward System Access (DISA)
System Programming