Rear Side Door Window Frame Front Applique And Front Channel Replacement - Suzuki XL7 2007 Service Manual

9M-13 Exterior Body Panels:
Callout
Preliminary Procedure
1. Remove the interior liftgate trim panel. Refer to "Liftgate Trim Panel Replacement (Upper): " "Liftgate Trim Panel
Replacement (Lower): ".
2. Remove the rear wiper arm and blade assembly. Refer to "Rear Window Wiper Arm Replacement: ".
Liftgate Center Applique Nuts (Qty: 4)
1
Tip: Release the four lower nuts, first and ensure the foam gaskets are in place on the studs prior to
re-assembly.
Integral Retainers (Qty: 5)
2
Tip: Release the five upper retainers, second.
Liftgate Center Applique
3
Tip: Pull the panel rearward and disconnect the electrical connector and two bulbs from the liftgate
panel.

Rear Side Door Window Frame Front Applique and Front Channel Replacement

Callout
Fastener Tightening Specifications: Refer to "Fastener Tightening Specifications - Exterior Trim".
Rear Side Door Front Frame Applique Screw
1
Tightening torque
2 N⋅m (20 lb in)
2 Rear Side Door Front Frame Applique Assembly
Component Name
Component Name