Tolerance Control For Absolute Values - KERN AES Operation Manual

11.7.4 Tolerance control for absolute values

• Entering 2 limits by weighing
1. How to enable the tolerance weighing function
[2.SEL.2] or [2.SEL.3], see chpt. 11.7.3.
2. For settings in menu see chpt. 11.7.3.
3. How to save settings / how to exit the menu
Press the S-key
Weighing balance is in tolerance mode, the trian-
gular tolerance tags are faded in.
4. Entering limiting values:
Press the S-key for about 4 seconds until
[L. SET.] appears and then let go. The most re-
cently saved lower limit will be displayed (flash-
ing).
58
Setting for 2 limiting values:
Setting for absolute value:
0.0000
L. SET
0.0000
M
AES/AEJ-BA-e-0912
g
g