Initial Commissioning; Basic Operation; Switching On/Off - KERN AES Operation Manual

7.4 Initial Commissioning

In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap. 1).
During this warming up time the balance must be connected to the power supply
(mains, accumulator or battery).
To adapt the balance to ambient conditions, open wind screen doors.
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.

8 Basic Operation

8.1 Switching on/off

If the (*) sign can be seen, the balance is being sup-
plied with power via the mains adaptor.
Turn on balance by pressing the ON/OFF key. The
balance will carry out a self-test The balance is ready
for weighing when the weight display appears.
The weighing balance will start in the mode it was in
when last switched off, e. g. piece counting.
Turn off balance by pressing the ON/OFF key.
Symbol (*) appears.
16 AES/AEJ-BA-e-0912