Weighing / Weighing Unit Change; Parts Counting - KERN AES Operation Manual

11.1 Weighing / Weighing unit change

Place goods to be weighed on balance
Wait until the stability display appears [ ]
Read weighing result.
Press repeatedly the button F to switch-over dis-
play into net/gross
Net weight unity A
see chapter 8.4, or in other activated weighing
unity (menu setting [ C3.W.B ] )

11.2 Parts counting

During piece counting parts can either be counted into a container or out of a con-
tainer. To count a greater number of parts the average weight per part has to be
determined with a small quantity (reference quantity).
The larger the reference quantity, the higher the counting exactness.
High reference must be selected for small parts or parts with considerably different
sizes.
The process has four steps:
• Tare the weighing container
• Determine the reference unit
• Original weighing of reference weight
• Count the items
Activate function
In weighing mode keep the F-key pressed down
until [FWnm] appears on the display. Release but-
ton. The first menu item showing the current set-
ting will be displayed.
Use the TARE-key to select "piece counting" and
confirm by pressing the S-key.
The balance is situated in the piece counting
mode.
AES/AEJ-BA-e-0912
↔
gross weight unity A
100.0000
B/G
100.0000
500.000
mT
Fonm
PCS
0
37
g
g