KERN AES Operation Manual page 38

Determine the reference unit
If required, place a weighing container on the
weighing pan
Press the F-key for about 4 seconds until
[U. SEt.] appears and then let go.
The reference quantity is displayed flashing.
The display e.g. 10 Pcs. prompts you to enter 10
pieces as reference.
Change reference quantity
Select the desired number of reference pieces by
pressing the TARE-key.
10
5
100
Important: The larger the reference quantity, the
more accurate the parts counting.
Original weighing of reference weight
Place as many pieces to add-up as required by
the set reference piece number.
Press F key
By adding more pieces (up to the 3-fold quantity),
you can optimise the reference. At every refer-
ence optimisation, the reference weight is calcu-
lated anew. As the additional pieces increase the
base for the calculation, the reference also be-
comes more exact.
Symbol [+] on the display indicates that you are
requested to add more parts.
38
30
U. SET.
Qn 1O
M
+
Qn 10
The balance offers the possibility of
reference optimisation. If you do not
want this, press F key.
+
Qn 28
AES/AEJ-BA-e-0912
PCS
PCS
PCS