Operating Modes - KERN AES Operation Manual

11 Operating modes

Depending on the setting in menu 1, it is possible to switch the weighing balance to
additional enabled operating modes by pressing the F-key, see chpt. 10.1.2 menu
item [q SET.]. Additional operating modes such as add-up / tolerance weighing
may be enabled under menu item [r SEL] (except density determination mode).
Menu item Application
Weighing
q SET. 1
Weighing/parts counting
q SET. 2
Weighing/percent determination
q SET. 3
Weighing / weighing with freely programmable weighing unit
q SET. 4
Weighing / density determination of solids
q SET. 5
Weighing / density determination of liquids
q SET. 6
Adding
r SEL 1
Tolerance weighing
r SEL 2
Add-up / tolerance weighing
r SEL 3
Overview of available functions
Operating mode
Weighing unity A
Weighing unit A
B/G
Weighing
Weighing unit B
Weighing unit A Σ
Pcs
Pcs Σ
Parts counting
Weighing unit A Pcs
Weighing unity A
%
Percent determina-
% Σ
tion
Weighing unity A
#
Weighing with freely
# Σ
programmable
weighing unit
Weighing unity A
Density determina- g (fix)
tion (solids/liquids)
= available
×
= not available
Display = value being shown
36
Mode
Unit Function
Weighing
Gross weight
Weighing
Adding
Counting
Total piece counting
Average parts weight
Weighing
Percent
tion
Total percentage
Weighing
Multiplication factor
Total
Weighing
Density determina-
tion mode
Additional functions
Adding
×
×
Display
Display
×
×
determina-
Display
×
Display
×
×
AES/AEJ-BA-e-0912
Tolerance
weighing
×
×
×
×
×
×
×
×
×