KERN AES Operation Manual page 59

5. Place sample for the lower (i.e. smaller) limiting
value on the weighing plate:
6. Save by pressing the F-key. The lower limit will
briefly be faded in, followed by [H. SET] (This
completes the entry provided only one limit is set
for tolerance control – menu setting [23.
7. Wait until the display starts flashing and the most
recently upper limit is displayed. Place sample for
the upper (i.e. larger) limiting value on the weigh-
ing plate.
8. Save by pressing the F-key.
The upper limit will be faded in and the weighing bal-
ance returns to tolerance weighing mode.
Remove sample. From here evaluation takes place
whether the goods to be weighed are within the two
tolerance limits.
Display change
Pressing the F-key repeatedly is a way to change the display value to additional en-
abled functions.
AES/AEJ-BA-e-0912
H. SET
1
P .1])
1
0.0000
M
0.0000
g
g
59