Settings For Density Determination; Settings For Tolerance Weighing / Add-Up - KERN AES Operation Manual

10.1.3 Settings for density determination

Measure medium
Data output
Autom.
Data output

10.1.4 Settings for tolerance weighing / add-up

Not displayed at menu setting „
Menu item
Display conditions of
the tolerance marker
Tolerance range
Number of limiting
points
Grading
24. TXP.
Display of
Results
Adding
26 AD.N.
32
* 0 dest. Water
1q NED.
* 0 only output measuring value density
12. D.Q.D.
* 0 OFF (Output only after pressing PRINT key)
13. A.Q.
r SEL 0
Display Selection
1
*
21. CQ.
2
0
22. L .
K
1
*
1
2
*
23. P
1
3
4
1
*
2
1
*
25. LG
2
1
*
2
1 Measuring liquid of your selection
1 Output of all density parameters
1 ON
"
Description
Tolerance marker is always displayed, even if
standstill control is not yet displayed.
Tolerance marker is only displayed in connection
with standstill control.
Tolerance marker is only displayed above zero
range (mind + 5).
Tolerance marker is displayed for the whole
range.
1- Limiting point (OK/ -)
2- Limiting points (+/OK/-)
3- Limiting points (1-4)
4- Limiting points (1-5)
for absolute values
for differential values
Display via +, OK or -
For setting 2 limits display in bar graph is possi-
ble
Add-up function without
AUTO-TARE
Adding function with
AUTO-TARA
AES/AEJ-BA-e-0912
During setting only
[ ]
or
r SEL1
[ ]
r SEL3