KERN AES Operation Manual page 42

Display change
Pressing the F-key repeatedly is a way to change the display value to [g] or [%] or
additional functions (see chpt. 11).
Print
The display value can be printed out by connecting an optional printer and press-
ing the PRINT-key, see chpt. 15 "printer mode".
[ ] is displayed during printing.
Printout
• Display value in [%]
+00033.33 % S
1 2
• Display value in [g]
+199.996/7 G U
3 4 5
• Total in [%]
+00086.97 %TS
6 7
Reference weight < minimum weight = underload
L-ERR
Minimum load ≤ reference weight < minimum load x 10
1 %
Minimum load x 10 ≤ reference weight < minimum load x 100
0.1 %
Minimum load x 100 ≤ reference weight
0.01 %
Minimum load dependent on model, see chpt. 1 "Technical specifications".
The reference weight (100 %) will remain stored even after the weighing bal-
ance was turned off until the reference is reset.
42
1 % Percent determination
2 S Stable value
Auxiliary display
3 /
(verifiable models only)
4 G Weighing unit "gram"
5 U Instable value
6 T Sum
7 S Stable value
AES/AEJ-BA-e-0912