Adjustment With External Weight (Only Aes) - KERN AES Operation Manual

9.4 Adjustment with external weight (only AES)

During adjustment tests the balance automatically compares the saved value of the
adjustment weight with the actual value. This is only a check, i.e. no values are
changed.
Condition: For menu setting [
Press the CAL key
Operate the CAL-key
When display [on F.S] appears, put the adjusting
weight carefully in the centre of the weighing pan.
Adjustment test is starting
The difference between the saved value and the
measured value is displayed.
Adjustment protocols will be issued if you connect
an optional printer and by pressing the PRINT-
key, see chpt. 15 "printer mode". Whilst printing is
in progress [ ] will be displayed.
Press any key; adjustment process will stop. Re-
move adjusting weight, balance will return into
weighing mode.
24
] see chpt. 10.1.2
x CA. 4
CAL
T. EHT. 1
CAL
PWSH C
CAL
T. EHT.
1
CAL
Qn. O
CAL
Qn
F.5.
CAL
Qn
F.5.
CAL
D1FF
CAL
z0007
CAL
EnD
AES/AEJ-BA-e-0912
g