Underfloor Weighing - KERN AES Operation Manual

8.7 Underfloor weighing

Objects unsuitable for placing on the weighing scale due to size or shape may be
weighed with the help of the flush-mounted platform.
Proceed as follows:
•
Switch off the balance
•
Remove the weighing pan and carefully turn over the weighing balance.
•
Loosen screw, turn cover plate (1) by 90º and reattach with the help of
the screw.
•
Suspend hook for underfloor weighing carefully and completely.
•
Place weighing balance over an opening.
•
Attach load to hook and carry out weighing procedure.
Fig. 1: Setup of balance for underfloor weighing
Always ensure that all suspended objects are stable enough to
▬
hold the desired goods to be weighed safely (danger of breaking).
Never suspend loads that exceed the stated maximum load (max)
▬
(danger of breaking)
Always ensure that there are no persons, animals or objects that
▬
CAUTION
might be damaged underneath the load.
After completing the underfloor weighing the opening on the bottom of
the balance must always be closed (dust protection).
20
1
2
AES/AEJ-BA-e-0912