Count With Tolerance Control - Fill To Target; Set Tolerance Value For Target Number Of Pieces - KERN CXB 3K0.2 Operating Instruction

8.5 Count with tolerance control - Fill to target

This function can be used to program a target number of pieces or target weight.
Reaching the target value is indicated by an audio-visual signal.

8.5.1 Set tolerance value for target number of pieces

Reaching the target value will be indicated by an audio signal and [-QtY-] will be
flashing in the reference window.
Press button
Press button
Use number keys to enter desired target number of pieces
Press button
Press button
Erase tolerance value:

When entering the target weight, enter value „0"
30
Entered target value.
Corrections possible by
pressing button
CXB-BA-e-1723