KERN AES Operation Manual page 40

Print
The display value can be printed out by connecting an optional printer and press-
ing the PRINT-key, see chpt. 15 "printer mode".
[ ] is displayed during printing.
Printout
• Number of parts placed
+0000020 PC S
1 2
• Average part weight "g/Pcs"
+9.999719 GUU
3 4
• Weight of parts placed on balance in "g"
+199.996/7 G S
5 6 7
Display Description
3-fold quantity was exceeded during reference optimisation.
SUB
Either you accept the error and confirm by pressing the F-key or re-
start reference calculation.
The number of pieces placed is too small for a correct reference cal-
ADD
culation.
Either you accept the error and confirm by pressing the F-key or you
add additional items.
Piece below minimum weight of piece (See chpt. 1 "Technical speci-
L-ERR
fications"):
To interrupt a reference calculation, press the PRINT-key.
The reference weight will remain stored even after the weighing balance was
turned off until the reference is reset.
40
1 PC Parts counting
2 S Stable value
Average weight of parts
3 GU
in gram
4 U Instable value
Auxiliary display
5 /
(verifiable models only)
6 G Weighing unit "gram"
7 S Stable value
AES/AEJ-BA-e-0912