11.3.2 Numeric entering of the reference weight
Activate function
See chpt. 11.3.1
How to determine a reference weight (100 %)
If required, place a weighing container on the
weighing pan
Press the F-key for about 4 seconds until
[P. SEt.] appears and then let go.
The most recently saved reference weight will be
displayed (flashing).
Enter reference weight (=100 %)
Each time the TARE-key is pressed, numbers will run
through from 0-9 and the decimal point.
⇒
⇒
1 ⇒
0
Select the number to be changed using F key (the
active position flashes):
Save the reference weight by pressing the
S-key
or
cancel the entry by pressing the PRINT-key.
Percent determination
Place goods to be weighed on balance.
The weight of the sample is displayed in percent-
age in terms of the reference weight.
Display change
Pressing the F-key repeatedly is a way to change the
display value, for instance to [g] or [%].
AES/AEJ-BA-e-0912
≈
⇒
⇒
2 9
0
0
P. SET.
. O 0000
M
000z0000
012z0000
8u37
%
g
g
g
%
43