Display Speed; Data Output - KERN AES Operation Manual

8.5 Display speed

To change the display speed of the weighing balance without invoking the menu,
press the S-key. However, this only will limit your options to the three settings nor-
mal slow fast.
Within the menu it is possible to fine-tune the weighing balance for certain ambient
conditions and measuring purposes, see chpt. 10.1.1, menu items [S.RE.*] and
[6.EnU.*].
Press the S-key, current setting appears.
Repeated pressing of the S-key allows you to se-
lect any of the following settings
normal slow
After selecting, wait until the weighing balance
has returned automatically to weighing mode.
These settings correspond to the settings in menu item [
S-key Adjustment
FAST
FAST
NORMAL
nORNAL
SLOW
SLQU

8.6 Data output

To print out or transfer weighing and GLP data to a computer you will have to con-
nect a printer or computer. The weighing balance's factory settings define that data
output happens after successful rest position control was carried out followed by
pressing the PRINT-key. For additional settings see chpt. 10.1.5.
During a display weighing data are calculated via interface.
AES/AEJ-BA-e-0912
fast
Description
Weighing balance sensitive and
fast
Weighing balance working at
medium speed
Weighing balance insensitive and
slow
FAST
NORNAL
*] and [ *].
Corresponding settings
in menu
6.EnU S.RE.
0 1
0 3
1 3
19