Evaluation Of Absolute Values; Entering 2 Limits By Weighing - KERN FES 33K0.1 IPM Operating Instruction

12.4 Evaluation of absolute values

12.4.1

Entering 2 limits by weighing

Important information!
Always begin by entering the lower limit value, followed by the upper limit value.
Enter.
Operation
1. Activate tolerance weighing function
[2.SEL.2] or [2.SEL.3] (see chap. 7).
2. Actuate required parameter selection
or
until
[23. P .1] or [24. TXP.1] is displayed;
1
more settings of your choice (see tab.1,
chapter 12.3) are carried out in the same
way
3. Leave function menu
58
Display
r SEL 2
2q CQ. 1
Parameter selection for 2 limiting points:
2s P . 2
Parameter selection for absolute value:
2t TXP. 1
a
The balance is now in tolerance weigh-
ing mode; the tolerance marker ( )
appears
FES/FEJ-BA-e-1132
1
z0
g