11.3 Percent determination
Percentage calculation facilitates weight display in percent related to a reference
weight equivalent to 100 %.
11.3.1 Entering the reference weight by weighing
Activate function
In weighing mode keep the F-key pressed down
until [FWnm] appears on the display. Release but-
ton. The first menu item showing the current set-
ting will be displayed.
Press the TARE-key repeatedly until menu item
"percentage calculation" appears.
Confirm by pressing the S-key.
The balance is situated in the percent determining
mode.
How to determine a reference weight (100 %)
If required, place a weighing container on the
weighing pan
Press the F-key for about 4 seconds until
[P. SEt.] appears and then let go.
The most recently saved reference weight will be
displayed (flashing).
Put on reference weight (=100 %)
Confirm by pressing the F-key. This completes
the determination of a reference weight.
Remove reference weight
Percent determination
Place goods to be weighed on balance.
The weight of the sample is displayed in percent-
age in terms of the reference weight.
AES/AEJ-BA-e-0912
Fonm
0
P. SET.
. O 0000
M
10z00
8u37
%
g
%
%
41