Adding Of Displayed Values - KERN AES Operation Manual

11.6 Adding of displayed values

This function can be used to automatically add any number of single weighings to a
total, such as single weighings of a batch.
The add-up function is available for the following functions:
• Weighing
• Parts counting
• Percent determination
• Weighing with freely programmable weighing unit
Activate function
In weighing mode keep the F-key pressed down
until [FWnm] appears on the display. Release but-
ton. The first menu item showing the current set-
ting will be displayed.
Press the F-key and menu item [2 SEL] will
appear.
Select the desired setting by pressing the TARE-
key
[1] : Add-up
[3] : Tolerance weighing /Add-up
Press the F-key again
Select the desired setting by pressing the TARE-
key
[ 1 ] : Add-up without AUTO-TARA
[ 2 ] : Adding with AUTO-TARA
Confirm by pressing the S-key.
(*) indicates that weighing balance is in add-up
mode.
AES/AEJ-BA-e-0912
Fonm
51