KERN AES Operation Manual page 71

How to change settings
Press the TARE-key to change the numeric value.
Press the F-key to select the digit (enabled digit is
flashing each time). Press the PRINT-key to can-
cel your entry.
Save setting
Press the S-key; balance will automatically return
to weighing mode.
Start interval output
Press the PRINT-key
[ ] flashing between output
L
[ ] flashing during output
Stop interval output
Press the PRINT-key; balance will automatically
return to weighing mode.
• Error message [
such as interval = 0
• When menu item [
take place showing current time.
AES/AEJ-BA-e-0912
6-ERR ] appears for invalid entries,
H q T.Q.
] is enabled, see chpt. 10.2 interval output will
⇒ 0⇒ 1⇒ 2～9⇒
START
L
10.0000
g
EnD
71