KERN AES Operation Manual page 49

Place sample and immerse it
Make sure that the sample holder does not touch
the beaker.
Wait until the weight display of the weighing bal-
ance has become stable and then store by press-
ing the S-key.
The density of your sample is displayed, charac-
terized by the symbol right above.
(1) Display change
Repeated pressing of the F-key is a way to
change from [density of sample] to [volume of
sample].
(2) Back to weighing mode. When [density of
sample] appears on the screen, press the S-key.
Weight of sample is indicated.
To interrupt measuring, press the PRINT-key.
AES/AEJ-BA-e-0912
13.5416
D
g
2.7004
D
2.7004
D
7.9513
D
49