Net/Gross - KERN AES Operation Manual

8.4 Net/gross

The dead weight of any weighing container may be tared away by pressing a but-
ton. For subsequent weighings the net weight of the goods to be weighed as well as
the gross weight goods + taring container can be displayed.
Condition: Menu setting [q SET.1],see chpt. 10.1.2
Place the weighing box and press the TARE-key.
After successful control of the rest position you
will see displayed zero and the Net symbol. The
weight of the container is now internally saved.
Weigh the material, the net weight will be indi-
cated.
Press the F-key to prompt a display of the gross
weight (load + weighing container) and the symbol
B/G.
To switch between net and gross weight, press
the F-key several times.
• This procedure may be repeated any number of times until the weighing
range of the weighing balance has been exhausted.
• Net/gross function only available in weighing mode.
• Taring is only available as long as net weight is displayed.
18
Net
a
0.0000
Net
100.0000
B/G
130.0000
Net
100.0000
AES/AEJ-BA-e-0912
g
g
g
g