Delete tolerance value:
In weighing mode press
7.7 Count with tolerance control - Fill to target
This function allows count-in parts within a tolerance determined beforehand.
Reaching the target value is now supported by an optical and an acoustic signal:
Target value
Placed piece number
below tolerance
Placed piece number
within tolerance
Placed piece number
above tolerance
7.7.1 Enter tolerance range
Note:
If a target value has been determined before by the
be deleted first:
Press
, enter „000000" and confirm by
First determine the piece weight as
specified in chap. 7.1 or 7.2.
Press
longtime, the display for
entering the lower limit value „PCS L"
appears.
Enter the lower limit value and confirm
with
CIB-BA-e-2010
, enter „000000" and confirm by
Optical signal
Display background
illumination lights yellow
Display background
illumination lights green
Display background
illumination lights red
.
Audio signal
Slow beeping
No beeping
Fast beeping
button, this value must
.
(example)
(example)
25