Output Weighing Data In Operating Mode; Data Status; Interval Data Output - KERN AES Operation Manual

14.4.5 Output weighing data in operating mode

S 1 = 1 word
S1 Code
L 4CH Goods to be weighed below tolerance limit
G 47H Goods to be weighed within tolerance range
H 48H Goods to be weighed above tolerance limit
1 31H
2 32H
3 33H
4 34H
5 35H
T 54H
U 55H
(SP) 20H
d 64H

14.4.6 Data status

S 2 = 1 word
S 2 Code
S 53 H
U 55 H
E 45 H
sp 20 H

14.4.7 Interval data output

When an interval output is started or stopped, this will result in the output of a
header or footer line.
Header
consisting of 15 characters (CR=0DH, LF=0AH)
1 2 3
- - -
Footers
Two line feeds are inserted.
AES/AEJ-BA-e-0912
Limit 1
Limit 2
Limit 3
Limit 4
Limit 5
Total (add-up)
Average piece weight (piece counting /
weight value (weighing)
No rating
Gross
Data stabilized *
Data not stabilized (fluctuating) *
Data error, all data apart from S 2 not allowed.
Balance indicating error (o-Err, u-Err)
No special status
4 5 6 7 8
- - - - -
Significance
1- or 2 end points
3- or 4 end points
File Type
Significance
9 10 11 12 13
- - - - -
14 15
- -
79