Adjustment With External Weight (Only Aes) - KERN AES Operation Manual

9.3 Adjustment with external weight (only AES)

Carry out adjustment with the help of the recommended adjustment weight (see
chapter 1 "Technical Specifications").
Info about adjustment weights can be found on the Internet at: http://www.kern-
sohn.com
Condition: Menu setting [
Press the CAL key
Press the CAL-key again; zero point will be
saved.
When display [on F.S] appears, put the adjusting
weight carefully in the centre of the weighing pan.
The adjustment process is started
The process of adjustment is completed.
Adjustment protocols will be issued automatically
if you connect an optional printer, see chpt. 15
"printer mode". Whilst printing is in progress
[busy ] will be displayed.
The balance returns automatically into weighing
mode.
Take away adjustment weight. An adjusting error
or incorrect adjusting weight will be indicated by
the error message [- Err]. Repeat adjustment
procedure.
AES/AEJ-BA-e-0912
], see chpt. 10.1.2
x CA. 3
CAL
CAL EHT. K
1
CAL
PWSH C
CAL
K
CAL 1 EHT.
CAL
Qn. O
CAL
Qn
F.5.
CAL
Qn
F.5.
CAL
BWSX
CAL
EnD
23