KERN AES Operation Manual page 47

2. Input parameter auxiliary liquid
Was dest.water selected as measuring liquid [1q NED. 0] the water temperature is
input (input range 0.0 to 99.9°).
Press and hold the TARE-key until the flashing
display used for entering water temperature ap-
pears.
Each time the TARE-key is pressed, numbers will
run through from 0-9 and the decimal point.
Select the number to be changed using F key (the
active position flashes):
Confirm by pressing the S-key.
Defined as auxiliary liquid of your choice [1q NED. 1]its density is input (input
range 0.0001 to 9.9999 g/cm
Press and hold the TARE-key until the flashing
display used for entering density appears.
Each time the TARE-key is pressed, numbers will
run through from 0-9 and the decimal point.
Select the number to be changed using F key
(the active position flashes):
Confirm by pressing the S-key.
AES/AEJ-BA-e-0912
0⇒ 1⇒ 2～9
3
).
0⇒ 1⇒ 2～9
15.0
D T
0.0000
D
g
1.0000
D
0.0000
D
g
47