Toner Safety; About Toner; Handling Adhered Toner; Notes When Handling A Battery - Canon mf6600 Series Service Manual

0
Safety Precautions > Notes On Assembly/Disassembly

Toner Safety

About Toner

Toner is a nontoxic matter composed of plastic, iron and a trace of pigments.
Never throw toner in flames to avoid explosion.
CAUTION:
Never throw toner in flames to avoid explosion.

Handling Adhered Toner

Use dry tissue paper to wipe off toner adhered to skin or clothes and wash in water.
•
Never use warm water for cleaning up toner to prevent toner particles from being gelated to
•
soak into fibers permanently.
Toner particles are reactive with vinyl polymers. Avoid contacting these materials.
•

Notes When Handling A Battery

CAUTION:
Risk Of Explosion If Battery Is Replaced By An Incorrect Type.
Dispose Of Used Batteries According To The Instructions.
The following warnings are given to comply with Safety Principles (EN60950).
CAUTION:
Wenn mit dem falschen Typ ausgewechselt, besteht Explosionsgefahr.
Gebrauchte Batterien gemäß der Anleitung beseitigen.
0 Safety Precautions > Notes On Assembly/Disassembly

Notes On Assembly/Disassembly

Follow the items below to assemble/disassemble the device.
1. Disconnect the power plug to avoid any potential dangers during assembling/disassembling
works.
2. If not specially instructed, reverse the order of disassembly to reinstall.
3. Ensure to use the right screw type (length, diameter, etc.) at the right position when
assembling.
4. To keep electric conduction, binding screws with washers are used to attach the grounding
wire and the varistor. Ensure to use the right screw type when assembling.
5. Unless it is specially needed, do not operate the device with some parts removed.
6. Never remove the paint-locked screws when disassembling.
CAUTION
DOUBLE POLE/NEUTRAL FUSING
0-3
F-0-4 F-0-4
0-3