Unfastening Attachments; Power Quick Attach - Terex PT-110 F Operation And Maintenance Manual

5 OPERATION
5.10 Unfastening Attachments (see also section 5.11)
1. Lower the lift arms so that the attachment
is just slightly off of the ground.
2. Pull the locking levers on the quick attach
mechanism upwards and toward the
outside of the machine to unlock the
attachment.
3. Lay the attachment gently onto the ground
by moving the lift arm control joystick
slowly to the right.
4. Once the attachment is in contact with the
ground, move the lift arm control joystick
gently to the right until the quick-attach is
clear of the attachment.
5. Back the machine away from the
attachment.
5.11 Power Quick Attach (optional)
Some machines may be equipped with a hydraulic
(power) quick attach. The procedure is the same
for fastening and unfastening attachments as
described in sections 5.9 and 5.10 with one
exception. The locking and unlocking of the
mechanism is performed by pressing a switch
instead of moving levers on the unit itself.
To lock the quick attach:
• Press the switch (item 1)
To unlock the quick attach:
• Press and hold the switch (item 1) until the L.E.D. illuminates.
PT-110/PT-110F US O&M
2095-479 2013-02
5.10-1
5.10-2
5.10-3
5.11-2
66
1