Chrysler 1998 Voyager Service Manual page 1516

21 - 42 TRANSAXLE AND POWER TRANSFER UNIT
DISASSEMBLY AND ASSEMBLY (Continued)
DETERMINING SHIM THICKNESS
Shim thickness need only be determined if any of
the following parts are replaced:
• Transaxle case
• Transfer shaft
• Transfer shaft gear
• Transfer shaft bearings
• Governor support retainer
• Transfer shaft bearing retainer
• Retainer snap ring
• Governor support
Refer to Bearing Adjustment Procedure in rear of
this section to determine proper shim thickness.
Fig. 110 Tighten Transfer Shaft Gear Retaining Nut
to 271 N·m (200 ft. lbs.)
Fig. 111 Checking Transfer Shaft End Play
ASSEMBLY
To install transfer shaft, reverse the above proce-
dure.
PARKING PAWL
DISASSEMBLY
Fig. 112 Parking Sprag Rod Support
Fig. 113 Support and Bolts
Fig. 114 Parking Pawl, Return Spring, and Pivot
ASSEMBLY
To install, reverse the above procedure.
Shaft
NS