Chrysler 1998 Voyager Service Manual page 1709

NS/GS
ADJUSTMENTS (Continued)
Fig. 211 Auxiliary Vent Removal
be screwed into the housing. This operation locks the
selector shaft in the 3-4 neutral position.
(5) Remove gearshift knob (Fig. 213).
(6) Remove gearshift boot (Fig. 214).
(7) Remove gearshift console screws and remove
the console (Fig. 215).
(8) Loosen crossover cable adjustment screw.
(9) Verify gearshift mechanism is in the neutral
position.
Fig. 210 Gearshift Mechanism
CAUTION: Be sure crossover bellcrank does NOT
move when tightening adjusting screw.
A–598 MANUAL TRANSAXLE
Fig. 212 Lock Pin Installation
21 - 53