Chrysler 1998 Voyager Service Manual page 1815

NS/GS
REMOVAL AND INSTALLATION
GEARSHIFT CONSOLE . . . . . . . . . . . . . . . . . . . . 3
REMOVAL AND INSTALLATION
GEARSHIFT CONSOLE
REMOVAL
(1) Lift the parking brake lever to the full up posi-
tion (Fig. 1).
(2) Carefully pull the base of the gearshift boot off
the top of the gearshift console.
(3) Remove the four (4) screws from the top of the
gearshift console (Fig. 2).
(4) Tilt the gearshift boot and carefully push the
boot through the opening in the gearshift console.
(5) Separate console from vehicle.
Fig. 1 Console, Parking Brake Lever, and Gearshift
BODY COMPONENT SERVICE
Boot
INDEX
page
LIFTGATE CHMSL ACCESS PANEL . . . . . . . . . . . 3
Fig. 2 Gearshift Console and Boot Removal
INSTALLATION
(1) Tilt the gearshift boot and carefully push the
boot through the gearshift console.
(2) Install screws to hold gearshift console to gear-
shift mechanism.
(3) Install gearshift boot and carefully push the
clips into the three (3) slots in the gearshift console.
LIFTGATE CHMSL ACCESS PANEL
REMOVAL
(1) Using a trim stick (C-4755), disengage clip
holding CHMSL access panel to liftgate trim panel
(Fig. 3).
(2) Disengage hooks on CHMSL access cover from
liftgate trim panel.
(3) Separate access panel from vehicle.
BODY 23 - 3
page