Chrysler 1998 Voyager Service Manual page 1614

21 - 140 TRANSAXLE AND POWER TRANSFER UNIT
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 288 Remove Bearing Retainer
WARNING: HOLD ONTO DIFFERENTIAL ASSEMBLY
TO PREVENT IT FROM ROLLING OUT OF HOUSING.
(4) Use Miller Special Tool 5048, 5048-3 Collets,
and L-4539-2 Button to remove the differential bear-
ing cone on the extension housing side.
(5) Use Miller Special Tool 5048, 5048-4 Collets,
and L-4539-2 Button to remove the differential bear-
ing cone on the bearing retainer side (Fig. 289) (Fig.
290) (Fig. 291).
Fig. 289 Position Button and Collets Onto
Differential and Bearing (Ring Gear Side)
(6) Using Miller Special Tool L-4518, remove the
differential bearing race from the extension housing.
(7) Using Miller Special Tool 6062A, remove the
differential bearing race from the bearing retainer
(Fig. 292) (Fig. 293).
Fig. 290 Position Tool 5048 Over Button and Collets
at Differential Bearing (Ring Gear Side)
Fig. 291 Remove Differential Bearing Cone (Ring
Gear Side)
Fig. 292 Position Bearing Cup Remover Tool in
Retainer
NS