Chrysler 1998 Voyager Service Manual page 1707

NS/GS
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 204 Special Tool 6933
Fig. 205 Press Input Bearing Into Case
(6) Apply a small bead of Mopar gasket Maker to
the input bearing retainer.
(7) Install bearing retainer.
(8) Install clutch release fork onto clutch release
bearing.
(9) Install bearing and fork onto input bearing
retainer sleeve.
(10) Install clutch release shaft bushings into tran-
saxle case.
(11) Install clutch release shaft into case and
install E-clip onto shaft (Fig. 206).
A–598 MANUAL TRANSAXLE
Fig. 206 Clutch Release Shaft
SHIFT RAIL BUSHINGS
REMOVAL
(1) Install Special Tool 6786 into rail bushing that
is to be removed (Fig. 207).
(2) Tighten tool until the tool is thoroughly imbed-
ded into the bushing.
(3) Install Special Tool 3752 (Slide Hammer) into
Special Tool 6786 (Fig. 208).
(4) Tap out shift rail bushing (Fig. 209).
Fig. 207 Special Tool 6786
INSTALLATION
(1) Lubricate outer shell of the shift rail bushing.
(2) Position shift rail bushing into the shift rail
bore.
(3) Tap bushing into the bore, flush with the bore
face
21 - 51