Chrysler 1998 Voyager Service Manual page 1613

NS
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 283 Install Pan Bolts
(1) Install transaxle solenoid pack (Fig. 284).
Fig. 284 Install Solenoid Pack
(2) Install input and output speed sensors.
This concludes the assembly of the transaxle cen-
terline.
DIFFERENTIAL REPAIR
NOTE: The differential is serviced as an assembly.
The only parts that are serviceable within the differ-
ential are the differential bearing cups and cones. If
any other part fails within the differential, you must
replace the differential assembly along with the
transfer shaft.
DISASSEMBLE
The transfer shaft should be removed for differen-
tial repair and bearing turning torque checking.
(1) Remove the differential cover and bolts (Fig.
285) (Fig. 286).
(2) Remove the differential bearing retainer and
bolts (Fig. 287) (Fig. 288).
TRANSAXLE AND POWER TRANSFER UNIT
Fig. 285 Differential Cover Bolts
Fig. 286 Remove Differential Cover
Fig. 287 Differential Retainer Bolts
(3) Using a plastic hammer, remove extension
housing/adapter plate on the right side of the tran-
saxle.
21 - 139