Chrysler 1998 Voyager Service Manual page 1678

21 - 22 A–598 MANUAL TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 70 Gearshift Cover
NOTE: Two of the bolts retaining the shift cover are
shouldered. Mark the bolts and the location (Fig.
71).
Fig. 71 Gearshift Cover Shouldered Bolts
Fig. 72 Shift Cover Removed
(7) Remove shift cover splash shield (Fig. 73).
Fig. 73 Shift Cover Splash Shield
(8) Remove shift detent springs (Fig. 74) and roll-
ers (Fig. 75).
NOTE: On some A-598 transaxles all four detent
springs are of the same color and spring tension.
On other A-598 transaxles, three identical springs
are used on the forward gear detents, while the
reverse detent spring is a different tension and
color.
Fig. 74 Shift Detent Springs
(9) Remove reverse pivot lever actuator arm (Fig.
76).
(10) Remove 1–2 roll pin at 1–2 shift fork (Fig. 77).
(11) Rotate 1–2 shift lug out of the way.
(12) Remove 3–4 roll pin at 3–4 shift lug (Fig. 78).
(13) Remove 5th gear/synchro end cover (Fig. 79)
(Fig. 80).
NS/GS