Chrysler 1998 Voyager Service Manual page 1742

23 - 12 BODY
REMOVAL AND INSTALLATION (Continued)
Fig. 8 Bench Seat Track – Second Rear
BUCKET SEAT BACK
REMOVAL
(1) Remove seat cushion pan.
(2) Remove nut holding recliner to seat back frame
(Fig. 9).
(3) Remove pivot bolts holding seat back frame to
seat track.
(4) Remove seat back from recliner.
INSTALLATION
(1) Place seat back mounting stud into recliner.
(2) Install pivot bolts to hold seat back frame to
seat track.
(3) Install nut to hold recliner to seat back frame
(Fig. 9).
(4) Install seat cushion pan.
BUCKET SEAT BACK ASSIST STRAP
REMOVAL
(1) Using a small screw driver, pry screw plugs
from ends of assist strap (Fig. 10).
(2) Remove screws holding assist strap to seat
back.
(3) Remove assist strap from vehicle.
INSTALLATION
(1) Place assist strap in position on vehicle.
(2) Install screws to hold assist strap to seat back.
(3) Insert screw plugs into ends of assist strap
(Fig. 10).
Fig. 9 Bucket Seat Back
Fig. 10 Bucket Seat Back Assist Strap
BUCKET SEAT CUSHION PAN
REMOVAL
(1) Remove bucket seat from vehicle.
(2) Remove seat cushion side covers.
(3) If equipped, remove power seat track front and
rear cover.
(4) If equipped, remove stowage bin.
(5) Remove bolts holding seat cushion pan to seat
track.
(6) Remove seat cushion pan from seat.
(7) Disengage J-strip retainers holding seat cover
to cushion pan.
(8) Separate seat cushion pan from cover and pad.
NS