Chrysler 1998 Voyager Service Manual page 1471

NS
REMOVAL AND INSTALLATION (Continued)
(23) Install the 3 bolts (1 in each spoke of the
steering wheel) attaching the air bag module to the
steering wheel. Tighten the 3 air bag module attach-
ing nuts to a torque of 11 N·m (100 in. lbs.).
(24) Install the steering column cover liner (Fig. 4)
on the lower instrument panel. Install and securely
tighten the 10 bolts (Fig. 4) attaching the steering
column cover liner to the instrument panel.
(25) Install the park brake pedal release cable on
the park brake release lever in the lower steering col-
umn cover (Fig. 3).
(26) Install the lower steering column trim panel
on the lower instrument panel. Install and securely
the screws attaching the lower steering column cover
to the instrument panel (Fig. 2).
(27) Connect negative (ground) cable on the bat-
tery terminal.
SPECIFICATIONS
STEERING COLUMN FASTENER TORQUE
SPECIFICATIONS
DESCRIPTION
STEERING WHEEL:
Retaining Nut . . . . . . . . . . . . . . .61 N·m (45 ft. lbs.)
STEERING COLUMN ASSEMBLY:
Mounting Bracket
Attaching Nuts. . . . . . . . . . . .12 N·m (105 in. lbs.)
Flex Coupler Pinch Bolt . . . . . . .27 N·m (240 in. lbs.)
Airbag Module Attaching Nuts . .11 N·m (100 in. lbs.)
STEERING 19 - 45
TORQUE