21 - 50
A–598 MANUAL TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 199 Clutch Release Fork
Fig. 200 Input Bearing Retainer
Fig. 201 Remove Input Bearing Retainer
INSTALLATION
(1) Position new input bearing into the transaxle
case (Fig. 203).
Fig. 202 Press Out Input Bearing
(2) Position transaxle case in shop press (bellhous-
ing side up).
(3) Install Special Tool 6933 into input bearing
(Fig. 204).
(4) Install Special Tool C-4171 into Special Tool
6933.
(5) Press input bearing into transaxle case (Fig.
205).
Fig. 203 Input Bearing
NS/GS