Chrysler 1998 Voyager Service Manual page 1321

NS
REMOVAL AND INSTALLATION (Continued)
(2) From inside the vehicle, hold up the pedal and
install the throttle cable and cable retainer in the
upper end of the pedal shaft.
(3) From the engine compartment, hold the throt-
tle body lever in the wide open position and install
the throttle cable. Install the throttle control shield.
THROTTLE CABLE
CAUTION: When servicing the accelerator pedal,
throttle cable or speed control cable, do not dam-
age or kink the core wire inside the cable sheath-
ing.
REMOVAL
(1) Working from the engine compartment, hold
the throttle body throttle lever in the wide open posi-
tion.
(2) Remove the throttle cable from the throttle
body cam (Fig. 59), (Fig. 60) and (Fig. 61).
(3) From inside the vehicle, hold up the pedal and
remove the cable retainer and throttle cable from the
upper end of the pedal shaft (Fig. 57).
(4) Remove retainer clip from throttle cable and
grommet at dash panel (Fig. 58).
(5) From the engine compartment, pull the throttle
cable out of the dash panel grommet. The grommet
should remain in the dash panel.
(6) Remove the throttle cable from throttle bracket
by carefully compressing both retaining ears simulta-
neously. Then gently pull the throttle cable from
throttle bracket.
Fig. 59 Throttle Cable Attachment to Throttle Body
Attachment—2.4L Engine
INSTALLATION
(1) From the engine compartment, push the hous-
ing end fitting into the dash panel grommet.
(2) Install the cable housing (throttle body end)
into the cable mounting bracket on the engine.
Fig. 60 Throttle Cable Attachment to Throttle Body
Attachment—3.0L Engine
Fig. 61 Throttle Cable Attachment to Throttle Body
Attachment—3.3/3.8L Engines
(3) From inside the vehicle, hold up the pedal and
install throttle cable and cable retainer in the upper
end of the pedal shaft.
(4) At the dash panel, install the cable retainer
clip between the end of the throttle cable fitting and
grommet (Fig. 58)
(5) From the engine compartment, rotate the
throttle lever wide open and install the throttle
cable.
FUEL SYSTEM 14 - 27